A ceiling fan speed control switch is a simple device that allows you to regulate the speed of your ceiling fan. The speed switch is connected to the motor through a wire called the run wire. A capacitor wire, which is 1.5 micro farada in size, is attached to the two terminals of the speed control. The capacitor’s red wire is connected to the start point of the fan. The neutral or green connection is to the common wire of the fan motor.
To install the switch, you will first need to connect the fan to the switch. The ceiling fan will need to be grounded to prevent it from overheating. To install the switch, you will need a few supplies of power. If the ceiling fan’s wiring is a complicated task, you may need to hire a licensed electrician to install it for you. Make sure to check the voltage range of the fan before attempting to connect it to the switch.
Before attempting to install a ceiling fan speed control switch, you must make sure that the fan is powered. The switch should be tested by the homeowner. If it’s not working, check the wiring. If it’s not, you may need to hire a professional electrician to help you. Once you have the fan running, you can then attach the new speed control switch. The wiring is usually backwards, so you may need to reverse the wires to make sure they’re connected correctly.